Logo
東海大學奈米科技研究中心-中心成員-中心成員-王立志 副校長

王立志 副校長

信箱:wanglc@thu.edu.tw
個人網站:http://www.ie.thu.edu.tw/people/bio.php?PID=5
分機:33500轉125

學歷

美國俄亥俄州立大學工業與系統工程系博士

 

經歷

企業資源規劃學會理事
東海大學副校長(2017-)
東海大學研發處研發長(2016-)
東海大學產學育成中心主任(2016-2017)
中國工業工程學會常務理事(2013-)
東海大學工學院院長(2011-2016)
中國工業工程學會理事(2011-2012)
東海大學工業工程與經營資訊學系主任(2007-2011)
SCM/APS Quality Assurance, Kingston Technology Company(2007-2009)
花仙子股份有限公司營運總部全球運籌專案專案諮詢顧問(2006-2009)
宏遠興業股份有限公司營運總部全球運籌專案專案諮詢顧問(2005-2007)
中華汽車股份有限公司企業整合專案顧問(1999-2000)
旺宏電子股份有限公司企業整合專案技術顧問(1998-2000)
漢翔航空工業公司飛機製造廠技術顧問(1997-1998)
東海大學工業自動化中心主任(1996-2003)
東海大學工業工程與經營資訊學系教授(1996-)
工研院機械所系統技術組特約研究員(1995-1996)
資訊工業策進會技術研究處技術顧問(1994-1995)
東海大學工業工程與經營資訊學系副教授
(1989-1996)

專長

供應鏈管理系統 (Supply Chain Management System)
現場控制系統 (Shop Floor Control System)
先進生產規劃與排程 (Advanced Planning and Scheduling System)
企業整合資訊系統 (Corporate Integration System)
精實系統 (Lean System)
服務與數位創新
(Service and Digital Innovation)

計畫

105學年度
數位製造與創新技術聯盟(3/3) (科技部)
105學年度大學校院創新創業扎根計畫:創新創業中心示範學校計畫 (教育部)
半導體晶圓廠產能分析與規劃模擬系統發展(2/3) (科技部)

104學年度
生產管理最佳化演算法 (資訊工業策進會)
智慧設備中介軟體市場分析報告研究計畫 (公司企業)
應用系統模擬於複雜排程下之即時產能規劃系統發展 (公司企業)
探討工業4.0虛實化系統架構與發展方法-以金屬加工業為例 (科技部)
數位製造與創新技術聯盟(2/3) (科技部)
大專校院試辦創新轉型計畫-東海大學推動創新創業型大學之組織環境建構種子計畫 (教育部)
半導體晶圓廠產能分析與規劃模擬系統發展(1/3) (科技部)
103學年度
建構一整合性物料與產能規劃系統-以金屬五金加工業為例 (科技部/公司企業)
數位製造與創新技術聯盟(1/3) (科技部)
整合性綠色供應鏈設計與規劃-以矽晶太陽能電池產業為例(3/3) (科技部)
102學年度
建構一結合GA搜尋演算法之生產規劃與排程模擬系統-以金屬加工產業為例 (科技部/公司企業)
應用系統模擬在不確定性與複雜排程下之產能投資規劃研究 (公司企業)
整合性綠色供應鏈設計與規劃-以矽晶太陽能電池產業為例(2/3) (科技部)
使用系統模擬研究在不確定性與複雜排程下的動態產能規劃 (公司企業)
次世代減碳技術與碳資產管理 (GREENS研究計畫)
工學院102學年度教學亮點計畫 (東海大學)
應用系統模擬與多變量統計分析建構半導體製程之動態產能規劃模式 (科技部)
101學年度
互動式WIP-based生產規劃系統發展-以機械五金加工業為例 (科技部)
精實生產管理系統與供應鏈管理專案 (公司企業)
整合性綠色供應鏈設計與規劃-以矽晶太陽能電池產業為例(1/3) (科技部)

期刊

(52). Chen, Y. W., L. Wang*, A. Wang, T. L. Chen, 2017, “A particle swarm optimization approach for modeling multi-stage closed loop supply chain - A case study for solar cell industry” Robotics & Computer Integrated Manufacturing, Vol. 43, Feb., 2017, pp. 111-123 (SCI, 2014 IF: 2.077, 5-Year IF: 2.183).
(51). Wang, L.*, A. Wang, C. Y. Chueh, 2017, “Development of a capacity analysis and planning simulation model for semiconductor fabrication” International Journal of Advanced Manufacturing Technology, (Accepted on June 23, 2016; SCI, 2015 IF: 1.568, DOI 10.1007/s00170-016-9089-z).
(50). Wang, L., C. Y. Cheng*, W. K. Wang, 2016, “Flexible supply network planning for hybrid shipment: A case study of memory module industry” International Journal of Production Research, Vol. 54, Issue 2, Jan. 17, 2016, pp. 444-458. (SCI, 2014 5-Year IF: 1.770).
(49). Wang, L., C. Y. Cheng, Y. T. Tseng*, Y. F. Liu, 2015, “Demand-pull replenishment model for hospital inventory management: a dynamic buffer adjustment approach” International Journal of Production Research, Vol. 53, Issue 24, December 17, 2015, pp. 7533-7546. (SCI, 2014 5-Year IF: 1.770).
(48). Wang, L. and C. Y. Cheng, 2014, “Service-oriented flexible supply network planning model for memory module industry” (Submitted to EJIE in January, 2012).
(47). Wang, L. and C. Y. Cheng, 2014, “Development of an integrated demand-supply balancing system for supply chain exception handling” International Journal of Information Systems and Change Management. Vol. 7, Issue 1, pp. 70-91, October, 2014. (EI)
(46). Liu, J. H., H. Y. Miao, S. Lakshmanan, L. Wang, and R. H. Tsai, “Fabrication of Metal Alloy Deposited Flexible MWCNT Buckypaper for Thermoelectric Applications” Journal of Nanomaterials
(45). Saravanan, L., Jih-Hsin Liu, Hsin-Yuan Miao, Li-Chih Wang, 2014, “Preparation and Investigation of Co-dispersed MWCNT Buckypaper for the Microwave Absorption,” Applied Mechanics and Materials. Vols. 479-480, pp. 20-24.
(44). Liu, Jih-Hsin, L. Saravanan, Hsin-Yuan Miao, Li-Chih Wang, 2014, “Thermoelectric Properties of Transition Metal Deposited MWCNT Buckypaper,” Applied Mechanics and Materials. Vols. 479-480, pp. 110-114.
(43). Miao, Hsin-Yuan, Jih-Hsin Liu, L. Saravanan, Li-Chih Wang, Tu-Way-Chen, 2013, “Photocurrent generation of TiO2 and Cuo doped MWCNT bucky paper,” Submitted to Asian Journal of Chemistry. Vol. 25, Supplementary issue, S9-S11.
(42). Wang, L, C. Y. Cheng, S. K. Lin, 2013, “Distributed feedback control algorithm in an auction-based manufacturing planning and control system” International Journal of Production Research, Vol. 51, Issue 9, May, 2013, pp. 2667-2679. (SCI, 2011 IF: 1.115).
(41). Liu, Jih-Hsin, Hsin-Yuan Miao, L. Saravanan, Li-Chih Wang, Ren-Hui Tsai, 2013, “Tuning of thermoelectric property in the flexible MWCNT buckypaper,” Submitted to Asian Journal of Chemistry. Vol. 25, Supplementary issue, S27-S29.
(40). 王立志,曾雅彩,林献琨 , 2013 "多方多點多部門產學合作創新模式-以共同開發記憶體模組產業供應鏈規劃系統為例", 管理與系統
(39). Chen, Y. Y., C. Y. Cheng, L. Wang*, T. L. Chen, 2013, “A hybrid approach based on the variable neighborhood search and particle swarm optimization for parallel machine scheduling problems- a case study for solar cell industry”, International Journal of Production Economics. Vol. 141, Issue 1, pp. 66-78. (SCI; IF: 1.760, 5-year IF: 2.384).
(38). Cheng, C. Y., T. L. Chen, L. Wang*, Y. Y. Chen, 2013, “A Genetic Algorithm for Multi-Stage and Parallel-Machine Scheduling Problems – A Case Study for Solar Cell Industry” International Journal of Production Research, Vol. 51, Issue 16, pp. 4755-4777. (SCI, 2011 IF: 1.115).
(37). Wang, L., Y. Y. Chen, T. L. Chen, C. Y. Cheng, C. W. Chang, 2013, “A Hybrid Flow shop Scheduling Model Considering Dedicated Machines and Lot-splitting for the Solar Cell Industry” International Journal of Systems Science, DOI:10.1080/00207721.2012.762557, Vol. 44, Issue 1, pp. 1-17 (SCI, 2011 IF: 0.991).
(36). Tsao, Che-Wei, L. Saravanan, Jih-Hsin Liu, Hsin-Yuan Miao, Li-Chih Wang, Jui-Wen Pan, 2013, “Microwave absorption properties of silver doped MWCNT buckypaper,” Asian Journal of Chemistry. Vol. 25, Supplementary issue, S5-S8.
(35). Wang, L., C. Y. Cheng, and S. L. Hsu , 2013, "A Closed-loop Feedback Simulation for RFID-based Manufacturing Planning and Control System", Int. J. of Information Technology and Management
(34). Chen, T. L., Y. Y. Chen, L. Wang, Y. W. Chen*, “Multi-Objective Robust Optimization for Closed-Loop Sustainable Supply Chain Design under Uncertainties” (Submitted to Applied Mathematical Modelling in December, 2013).
(33). Wang, L and C. Y. Cheng, 2012, “Service-oriented flexible supply network planning model for memory module industry” (Submitted to EJIE in January, 2012).
(32). Wang, L, C. Y. Cheng, S. K. Lin, 2012, "Distributed feedback control algorithm in an auction-based manufacturing planning and control system", International Journal of Production Research
(31). Chen, Y.W., C. Y. Cheng, H. Y. Miao, M. Zhang, R. Liang, C. Zhang, L. Wang*, B. Wang , 2012, "Application of Response Surface Methodology in the Optimization of Laser Treatment in Buckypaper Lighting for Field Emission Display", International Journal of Advanced Manufacturing Technology ,Vol. 22
(30). Wang, L, C. Y. Cheng, S. K. Lin, 2012, “Order allocation in a multi-level and multi-site supply chain considering material substitutions- A memory module industry case” (Submitted to Computers & Industrial Engineering in January, 2012).
(29). 王立志, 2011, "TFT-LCD訂單滿足規劃", 工程科技通訊114,p10-11
(28). Wang, L. , H. L. Shih , 2011, "An advanced overlapping production planning model in manufacturing supply chain", Journal of Manufacturing Technology Management, Vol.22, No. 7, pp.870-890
(27). Wang, C., Wang, L. , 2011, "A GA-based Sales Forecasting Model Incorporating Promotion Factors", Journal of Modern Applied Statistical Methods
(26). Wang, C. and Wang, L., 2011, "A GA based forecasting model focused on contextual factors: Some Empirical Results", Journal of Knowledge Globalization
(25). 王立志, 2010, "光電/液晶顯示器產業供應鏈管理應用", 自動化科技學會會刊
(24). 曾雅彩, 王立志, 2010, "應用SCOR模式建立流程績效衡量指標之研究", 運籌管理評論
(23). 周玉俐, 王立志, 2010 , "成霖公司需求鏈管理解決方案的發展",電子商務學報
(22). Wang, L., C. Y. Cheng, L. P. Huang, 2010, "A Genetic Algorithm for Directed Graph-based Supply Network Planning in Memory Module Industry", Industrial Engineering & Management Systems, Vol. 9, No. 3, p.227-p.241
(21). Wang, C. and Wang, L., 2009, “A forecasting model with consistent adjustments for anticipated future variations”, Journal of Applied Quantitative Methods, Vol.4, pp.463-484

(20). 王立志, 曾雅彩, 2009, 「花仙子公司績效衡量與管理系統的發展」 中山管理評論, 17 3 573-601 (TSSCI)
(19). Wang, L. and Lin, S., 2009, “A multi-agent based agile manufacturing planning and control system,” Computers & Industrial Engineering, Vol.57, pp.620-640. (SCI & EI)
(18). 曾雅彩, 王立志, 2007, 「花仙子之需求與配銷規劃」, 管理評論, 26, 55-70, 中華民國9612
(17). 王立志, 施宏霖, 2007, TFT-LCD業多階多廠區生產規劃模式之發展」, 工程科技通訊, 機械類, 91, 中華民國96
(16). 王立志, 林献琨, 2007, 「應用於成品布紡織業的整合性生產規劃與排程模式」, 紡織綜合研究期刊, 17, 1, 中華民國961, 1-19
(15). Wang, L. and M.R. Lee, 1998, "Modeling A FMS With Colored Timed Object-oriented Petri Nets," Journal of the Chinese Society of Mechanical Engineers, Vol.19, No.6, pp. 573-580 (獲九十學年度國科會研究獎助).
(14). 張育仁, 李慶恩, 王立志, 1998, 自我調適的動態系統3/4限制排程、模糊理論和遺傳演算法的應用, 工業工程學刊, 15, 6, 中華民國8711
(13). Wang, L. and S. Y. Wu, 1998, “Modeling with Colored Timed Object-Oriented Petri Nets for Automated Manufacturing Systems”, Computers and Industrial Engineering, Vol.34, No.2, pp.463-480 (獲八十八學年度國科會研究獎助).
(12). 王立志, 吳紹穎, 1998, 「以彩色時間性物件導向斐氏圖為基礎之自動化製造系統排程方法」, 工業工程學刊, 15, 3, 中華民國875, 269-286(本篇獲88年中國工程師學會工程論文獎;NSC86-2213-E-029-001; 獲八十九學年度國科會研究獎助)
(11). Wang, L., 1996, "An Integrated Object-Oriented Petri Net Paradigm for Manufacturing Control Systems", International Journal of Computer Integrated Manufacturing, Vol.9, No.1, pp. 73-87. (NSC84-2212-E- 029-001;獲八十七學年度國科會研究獎助).
(10). Wang, L., 1996, "The Development of an Object-Oriented Petri Net Cell Control Model", International Journal of Advanced Manufacturing Technology, Vol.11, No.1, pp. 59-69.
(9). Wang, L., 1996, “Object-oriented Petri Nets for Modelling and Analysis of Automated Manufacturing Systems”, Computer Integrated Manufacturing Systems, Vol. 26, No. 2, pp. 111-125 (NSC85-2212-E- 029-001;
獲八十六學年度國科會研究獎助).
(8). Wang, L., H. M. Chen and C. M. Liu, 1995, "Intelligent Scheduling with Inductive Learning Capability using Neural Networks", International Journal of Flexible Manufacturing Systems, Vol.7, No.2, April, pp. 143-171.(獲八十四學年度國科會研究獎助)
(7). 王立志, 林我聰, 游錫濱, 邱宏昇, 陳建光, 「製造資訊系統個體導向系統分析方法」, 工業工程學刊, 第十一卷, 第三期, 中華民國八十三年七月, 137-146
(6). Wang, L. and W. E. Wilhelm, 1993, “A PERT-Based Paradigm for Modeling Assembly Operations”, IIE Transactions, Vol. 25, No. 2, March, pp. 88-103. (獲八十三學年度國科會研究獎助).
(5). Wang, L., 1993, “The Development of a Neural Network based Due Date Assignment Model”, Jouranl of the Chinese Institute of Industrial Engineers, Vol.10, No.3, July, pp.209-217.

(4). 王立志, 魏傳益,「小批量裝配系統中物料流程模式之建立」, 工業工程學刊, 第九卷, 第二期, 中華民國八十一年七月, 25-33(獲八十二學年度國科會研究獎助).
(3). Wang, L. and W. E. Wilhelm, 1992, "A Recursion Model for Cellular Production/Assembly Systems", International Journal of Flexible Manufacturing Systems, Vol.4, No.2, January, pp.129-158. (
獲八十一學年度國科會研究獎助).
(2). Liu, Jih-Hsin, Hsin-Yuan Miao, Saravanan Lakshmanan, Li-Chih Wang, Ren-Hui Tsai, “Effect of metal alloy on the thermoelectric properties of multiwalled carbon nanotube buckypaper”, Submitted to Nanoscale research letters.
(1). Chou, Ying-Chyi, Ching-Hua Lu, Li-Chih Wang, Walter Den, “A hybrid MCDM method in selecting key success factors of firm greenhouse gas mitigation ”, Submitted to Journal of Cleaner Production (SCI).

 

學歷

美國俄亥俄州立大學工業與系統工程系博士

 

經歷

企業資源規劃學會理事
東海大學副校長(2017-)
東海大學研發處研發長(2016-)
東海大學產學育成中心主任(2016-2017)
中國工業工程學會常務理事(2013-)
東海大學工學院院長(2011-2016)
中國工業工程學會理事(2011-2012)
東海大學工業工程與經營資訊學系主任(2007-2011)
SCM/APS Quality Assurance, Kingston Technology Company(2007-2009)
花仙子股份有限公司營運總部全球運籌專案專案諮詢顧問(2006-2009)
宏遠興業股份有限公司營運總部全球運籌專案專案諮詢顧問(2005-2007)
中華汽車股份有限公司企業整合專案顧問(1999-2000)
旺宏電子股份有限公司企業整合專案技術顧問(1998-2000)
漢翔航空工業公司飛機製造廠技術顧問(1997-1998)
東海大學工業自動化中心主任(1996-2003)
東海大學工業工程與經營資訊學系教授(1996-)
工研院機械所系統技術組特約研究員(1995-1996)
資訊工業策進會技術研究處技術顧問(1994-1995)
東海大學工業工程與經營資訊學系副教授
(1989-1996)

專長

供應鏈管理系統 (Supply Chain Management System)
現場控制系統 (Shop Floor Control System)
先進生產規劃與排程 (Advanced Planning and Scheduling System)
企業整合資訊系統 (Corporate Integration System)
精實系統 (Lean System)
服務與數位創新
(Service and Digital Innovation)

計畫

105學年度
數位製造與創新技術聯盟(3/3) (科技部)
105學年度大學校院創新創業扎根計畫:創新創業中心示範學校計畫 (教育部)
半導體晶圓廠產能分析與規劃模擬系統發展(2/3) (科技部)

104學年度
生產管理最佳化演算法 (資訊工業策進會)
智慧設備中介軟體市場分析報告研究計畫 (公司企業)
應用系統模擬於複雜排程下之即時產能規劃系統發展 (公司企業)
探討工業4.0虛實化系統架構與發展方法-以金屬加工業為例 (科技部)
數位製造與創新技術聯盟(2/3) (科技部)
大專校院試辦創新轉型計畫-東海大學推動創新創業型大學之組織環境建構種子計畫 (教育部)
半導體晶圓廠產能分析與規劃模擬系統發展(1/3) (科技部)
103學年度
建構一整合性物料與產能規劃系統-以金屬五金加工業為例 (科技部/公司企業)
數位製造與創新技術聯盟(1/3) (科技部)
整合性綠色供應鏈設計與規劃-以矽晶太陽能電池產業為例(3/3) (科技部)
102學年度
建構一結合GA搜尋演算法之生產規劃與排程模擬系統-以金屬加工產業為例 (科技部/公司企業)
應用系統模擬在不確定性與複雜排程下之產能投資規劃研究 (公司企業)
整合性綠色供應鏈設計與規劃-以矽晶太陽能電池產業為例(2/3) (科技部)
使用系統模擬研究在不確定性與複雜排程下的動態產能規劃 (公司企業)
次世代減碳技術與碳資產管理 (GREENS研究計畫)
工學院102學年度教學亮點計畫 (東海大學)
應用系統模擬與多變量統計分析建構半導體製程之動態產能規劃模式 (科技部)
101學年度
互動式WIP-based生產規劃系統發展-以機械五金加工業為例 (科技部)
精實生產管理系統與供應鏈管理專案 (公司企業)
整合性綠色供應鏈設計與規劃-以矽晶太陽能電池產業為例(1/3) (科技部)

期刊

(52). Chen, Y. W., L. Wang*, A. Wang, T. L. Chen, 2017, “A particle swarm optimization approach for modeling multi-stage closed loop supply chain - A case study for solar cell industry” Robotics & Computer Integrated Manufacturing, Vol. 43, Feb., 2017, pp. 111-123 (SCI, 2014 IF: 2.077, 5-Year IF: 2.183).
(51). Wang, L.*, A. Wang, C. Y. Chueh, 2017, “Development of a capacity analysis and planning simulation model for semiconductor fabrication” International Journal of Advanced Manufacturing Technology, (Accepted on June 23, 2016; SCI, 2015 IF: 1.568, DOI 10.1007/s00170-016-9089-z).
(50). Wang, L., C. Y. Cheng*, W. K. Wang, 2016, “Flexible supply network planning for hybrid shipment: A case study of memory module industry” International Journal of Production Research, Vol. 54, Issue 2, Jan. 17, 2016, pp. 444-458. (SCI, 2014 5-Year IF: 1.770).
(49). Wang, L., C. Y. Cheng, Y. T. Tseng*, Y. F. Liu, 2015, “Demand-pull replenishment model for hospital inventory management: a dynamic buffer adjustment approach” International Journal of Production Research, Vol. 53, Issue 24, December 17, 2015, pp. 7533-7546. (SCI, 2014 5-Year IF: 1.770).
(48). Wang, L. and C. Y. Cheng, 2014, “Service-oriented flexible supply network planning model for memory module industry” (Submitted to EJIE in January, 2012).
(47). Wang, L. and C. Y. Cheng, 2014, “Development of an integrated demand-supply balancing system for supply chain exception handling” International Journal of Information Systems and Change Management. Vol. 7, Issue 1, pp. 70-91, October, 2014. (EI)
(46). Liu, J. H., H. Y. Miao, S. Lakshmanan, L. Wang, and R. H. Tsai, “Fabrication of Metal Alloy Deposited Flexible MWCNT Buckypaper for Thermoelectric Applications” Journal of Nanomaterials
(45). Saravanan, L., Jih-Hsin Liu, Hsin-Yuan Miao, Li-Chih Wang, 2014, “Preparation and Investigation of Co-dispersed MWCNT Buckypaper for the Microwave Absorption,” Applied Mechanics and Materials. Vols. 479-480, pp. 20-24.
(44). Liu, Jih-Hsin, L. Saravanan, Hsin-Yuan Miao, Li-Chih Wang, 2014, “Thermoelectric Properties of Transition Metal Deposited MWCNT Buckypaper,” Applied Mechanics and Materials. Vols. 479-480, pp. 110-114.
(43). Miao, Hsin-Yuan, Jih-Hsin Liu, L. Saravanan, Li-Chih Wang, Tu-Way-Chen, 2013, “Photocurrent generation of TiO2 and Cuo doped MWCNT bucky paper,” Submitted to Asian Journal of Chemistry. Vol. 25, Supplementary issue, S9-S11.
(42). Wang, L, C. Y. Cheng, S. K. Lin, 2013, “Distributed feedback control algorithm in an auction-based manufacturing planning and control system” International Journal of Production Research, Vol. 51, Issue 9, May, 2013, pp. 2667-2679. (SCI, 2011 IF: 1.115).
(41). Liu, Jih-Hsin, Hsin-Yuan Miao, L. Saravanan, Li-Chih Wang, Ren-Hui Tsai, 2013, “Tuning of thermoelectric property in the flexible MWCNT buckypaper,” Submitted to Asian Journal of Chemistry. Vol. 25, Supplementary issue, S27-S29.
(40). 王立志,曾雅彩,林献琨 , 2013 "多方多點多部門產學合作創新模式-以共同開發記憶體模組產業供應鏈規劃系統為例", 管理與系統
(39). Chen, Y. Y., C. Y. Cheng, L. Wang*, T. L. Chen, 2013, “A hybrid approach based on the variable neighborhood search and particle swarm optimization for parallel machine scheduling problems- a case study for solar cell industry”, International Journal of Production Economics. Vol. 141, Issue 1, pp. 66-78. (SCI; IF: 1.760, 5-year IF: 2.384).
(38). Cheng, C. Y., T. L. Chen, L. Wang*, Y. Y. Chen, 2013, “A Genetic Algorithm for Multi-Stage and Parallel-Machine Scheduling Problems – A Case Study for Solar Cell Industry” International Journal of Production Research, Vol. 51, Issue 16, pp. 4755-4777. (SCI, 2011 IF: 1.115).
(37). Wang, L., Y. Y. Chen, T. L. Chen, C. Y. Cheng, C. W. Chang, 2013, “A Hybrid Flow shop Scheduling Model Considering Dedicated Machines and Lot-splitting for the Solar Cell Industry” International Journal of Systems Science, DOI:10.1080/00207721.2012.762557, Vol. 44, Issue 1, pp. 1-17 (SCI, 2011 IF: 0.991).
(36). Tsao, Che-Wei, L. Saravanan, Jih-Hsin Liu, Hsin-Yuan Miao, Li-Chih Wang, Jui-Wen Pan, 2013, “Microwave absorption properties of silver doped MWCNT buckypaper,” Asian Journal of Chemistry. Vol. 25, Supplementary issue, S5-S8.
(35). Wang, L., C. Y. Cheng, and S. L. Hsu , 2013, "A Closed-loop Feedback Simulation for RFID-based Manufacturing Planning and Control System", Int. J. of Information Technology and Management
(34). Chen, T. L., Y. Y. Chen, L. Wang, Y. W. Chen*, “Multi-Objective Robust Optimization for Closed-Loop Sustainable Supply Chain Design under Uncertainties” (Submitted to Applied Mathematical Modelling in December, 2013).
(33). Wang, L and C. Y. Cheng, 2012, “Service-oriented flexible supply network planning model for memory module industry” (Submitted to EJIE in January, 2012).
(32). Wang, L, C. Y. Cheng, S. K. Lin, 2012, "Distributed feedback control algorithm in an auction-based manufacturing planning and control system", International Journal of Production Research
(31). Chen, Y.W., C. Y. Cheng, H. Y. Miao, M. Zhang, R. Liang, C. Zhang, L. Wang*, B. Wang , 2012, "Application of Response Surface Methodology in the Optimization of Laser Treatment in Buckypaper Lighting for Field Emission Display", International Journal of Advanced Manufacturing Technology ,Vol. 22
(30). Wang, L, C. Y. Cheng, S. K. Lin, 2012, “Order allocation in a multi-level and multi-site supply chain considering material substitutions- A memory module industry case” (Submitted to Computers & Industrial Engineering in January, 2012).
(29). 王立志, 2011, "TFT-LCD訂單滿足規劃", 工程科技通訊114,p10-11
(28). Wang, L. , H. L. Shih , 2011, "An advanced overlapping production planning model in manufacturing supply chain", Journal of Manufacturing Technology Management, Vol.22, No. 7, pp.870-890
(27). Wang, C., Wang, L. , 2011, "A GA-based Sales Forecasting Model Incorporating Promotion Factors", Journal of Modern Applied Statistical Methods
(26). Wang, C. and Wang, L., 2011, "A GA based forecasting model focused on contextual factors: Some Empirical Results", Journal of Knowledge Globalization
(25). 王立志, 2010, "光電/液晶顯示器產業供應鏈管理應用", 自動化科技學會會刊
(24). 曾雅彩, 王立志, 2010, "應用SCOR模式建立流程績效衡量指標之研究", 運籌管理評論
(23). 周玉俐, 王立志, 2010 , "成霖公司需求鏈管理解決方案的發展",電子商務學報
(22). Wang, L., C. Y. Cheng, L. P. Huang, 2010, "A Genetic Algorithm for Directed Graph-based Supply Network Planning in Memory Module Industry", Industrial Engineering & Management Systems, Vol. 9, No. 3, p.227-p.241
(21). Wang, C. and Wang, L., 2009, “A forecasting model with consistent adjustments for anticipated future variations”, Journal of Applied Quantitative Methods, Vol.4, pp.463-484

(20). 王立志, 曾雅彩, 2009, 「花仙子公司績效衡量與管理系統的發展」 中山管理評論, 17 3 573-601 (TSSCI)
(19). Wang, L. and Lin, S., 2009, “A multi-agent based agile manufacturing planning and control system,” Computers & Industrial Engineering, Vol.57, pp.620-640. (SCI & EI)
(18). 曾雅彩, 王立志, 2007, 「花仙子之需求與配銷規劃」, 管理評論, 26, 55-70, 中華民國9612
(17). 王立志, 施宏霖, 2007, TFT-LCD業多階多廠區生產規劃模式之發展」, 工程科技通訊, 機械類, 91, 中華民國96
(16). 王立志, 林献琨, 2007, 「應用於成品布紡織業的整合性生產規劃與排程模式」, 紡織綜合研究期刊, 17, 1, 中華民國961, 1-19
(15). Wang, L. and M.R. Lee, 1998, "Modeling A FMS With Colored Timed Object-oriented Petri Nets," Journal of the Chinese Society of Mechanical Engineers, Vol.19, No.6, pp. 573-580 (獲九十學年度國科會研究獎助).
(14). 張育仁, 李慶恩, 王立志, 1998, 自我調適的動態系統3/4限制排程、模糊理論和遺傳演算法的應用, 工業工程學刊, 15, 6, 中華民國8711
(13). Wang, L. and S. Y. Wu, 1998, “Modeling with Colored Timed Object-Oriented Petri Nets for Automated Manufacturing Systems”, Computers and Industrial Engineering, Vol.34, No.2, pp.463-480 (獲八十八學年度國科會研究獎助).
(12). 王立志, 吳紹穎, 1998, 「以彩色時間性物件導向斐氏圖為基礎之自動化製造系統排程方法」, 工業工程學刊, 15, 3, 中華民國875, 269-286(本篇獲88年中國工程師學會工程論文獎;NSC86-2213-E-029-001; 獲八十九學年度國科會研究獎助)
(11). Wang, L., 1996, "An Integrated Object-Oriented Petri Net Paradigm for Manufacturing Control Systems", International Journal of Computer Integrated Manufacturing, Vol.9, No.1, pp. 73-87. (NSC84-2212-E- 029-001;獲八十七學年度國科會研究獎助).
(10). Wang, L., 1996, "The Development of an Object-Oriented Petri Net Cell Control Model", International Journal of Advanced Manufacturing Technology, Vol.11, No.1, pp. 59-69.
(9). Wang, L., 1996, “Object-oriented Petri Nets for Modelling and Analysis of Automated Manufacturing Systems”, Computer Integrated Manufacturing Systems, Vol. 26, No. 2, pp. 111-125 (NSC85-2212-E- 029-001;
獲八十六學年度國科會研究獎助).
(8). Wang, L., H. M. Chen and C. M. Liu, 1995, "Intelligent Scheduling with Inductive Learning Capability using Neural Networks", International Journal of Flexible Manufacturing Systems, Vol.7, No.2, April, pp. 143-171.(獲八十四學年度國科會研究獎助)
(7). 王立志, 林我聰, 游錫濱, 邱宏昇, 陳建光, 「製造資訊系統個體導向系統分析方法」, 工業工程學刊, 第十一卷, 第三期, 中華民國八十三年七月, 137-146
(6). Wang, L. and W. E. Wilhelm, 1993, “A PERT-Based Paradigm for Modeling Assembly Operations”, IIE Transactions, Vol. 25, No. 2, March, pp. 88-103. (獲八十三學年度國科會研究獎助).
(5). Wang, L., 1993, “The Development of a Neural Network based Due Date Assignment Model”, Jouranl of the Chinese Institute of Industrial Engineers, Vol.10, No.3, July, pp.209-217.

(4). 王立志, 魏傳益,「小批量裝配系統中物料流程模式之建立」, 工業工程學刊, 第九卷, 第二期, 中華民國八十一年七月, 25-33(獲八十二學年度國科會研究獎助).
(3). Wang, L. and W. E. Wilhelm, 1992, "A Recursion Model for Cellular Production/Assembly Systems", International Journal of Flexible Manufacturing Systems, Vol.4, No.2, January, pp.129-158. (
獲八十一學年度國科會研究獎助).
(2). Liu, Jih-Hsin, Hsin-Yuan Miao, Saravanan Lakshmanan, Li-Chih Wang, Ren-Hui Tsai, “Effect of metal alloy on the thermoelectric properties of multiwalled carbon nanotube buckypaper”, Submitted to Nanoscale research letters.
(1). Chou, Ying-Chyi, Ching-Hua Lu, Li-Chih Wang, Walter Den, “A hybrid MCDM method in selecting key success factors of firm greenhouse gas mitigation ”, Submitted to Journal of Cleaner Production (SCI).